Saturday, October 31, 2009

6 Ft M1 Male to 3 RCA Component Projector Video Cable, Infocus+Dell

Reviews : 6 Ft M1 Male to 3 RCA Component Projector Video Cable, Infocus+Dell

6 Ft M1 Male to 3 RCA Component Projector Video Cable, Infocus+Dell
Product By STSI
No customer reviews yet. Be the first
Lowest Price : $17.64
Available From 1 Sellers
 

Technical Details


     

    Product Description

    Easily connect 3 RCA Component (YPrPb) source devices to your InFocus projector through its M1 port. This cable uses high quality, low loss, heavy duty cabling, with gold-plated, corrosion resistant connectors and pure copper conductors. ROHS compliant.

    Compatible With:

    • InFocus/Screenplay: LP70, LP70+, LP120, LP130, LP350, LP500, LP530, LP540, LP600, LP640, LP650, LP925, LP930, LP935, X2, X3, SP110, SP-4805, SP5000, SP-5700, SP-7200, SP-7205, SP-7210, SP777
    • Proxima: DP1000x, DP1200x, DP6500x
    • ASK-Proxima: C110, C160, C170, C180, C200, M1, M2, M2+
    Not compatible with the following Infocus models:
    • LP335, LP340, LP340B,
    *NOTE: This cable uses a P&D style M1 connector. If your projector uses an EVC style M1 connector, this cable will not fit. P&D and EVC have the same number of pins and pin arrangement but different shaped outer shells.


     

    Similar Products


     


     

    Compatible Lamps SP-LAMP-031-C - For Infocus LP690 Projector

    Reviews : Compatible Lamps SP-LAMP-031-C - For Infocus LP690 Projector

    Compatible Lamps SP-LAMP-031-C - For Infocus LP690 Projector
    Product By Compatible Lamps
    No customer reviews yet. Be the first
    Lowest Price : $209.00
    Available From 3 Sellers
     

    Technical Details


       

      Product Description

      Stampede Presentations SP-LAMP-031-C Compatible Lamp Replacement Lamp for Infocus LP690 Projectors. It makes sense to keep a spare lamp on hand because you never know when you will need it—until you turn on the projector. You might be preparing your quarterly presentation in the executive boardroom, warming up for a sales pitch for your most important customer, or sitting down to watch a film with your family. Suddenly the excitement of being prepared is interrupted by the realization that the lamp in your projector is just a little too old, or maybe it was damaged during your recent trip. If you have a spare lamp, you can change it immediately. Problem solved!


       

      Similar Products


       


       

      Friday, October 30, 2009

      Compatible Lamps SP-LAMP-LP260-C - For Infocus LP260 Projector

      Reviews : Compatible Lamps SP-LAMP-LP260-C - For Infocus LP260 Projector

      Compatible Lamps SP-LAMP-LP260-C - For Infocus LP260 Projector
      Product By Compatible Lamps
      No customer reviews yet. Be the first
      Lowest Price : $209.00
      Available From 2 Sellers
       

      Technical Details


         

        Product Description

        Stampede Presentations SP-LAMP-LP260-C Compatible Lamp Replacement Lamp for Infocus LP260 Projectors. It makes sense to keep a spare lamp on hand because you never know when you will need it—until you turn on the projector. You might be preparing your quarterly presentation in the executive boardroom, warming up for a sales pitch for your most important customer, or sitting down to watch a film with your family. Suddenly the excitement of being prepared is interrupted by the realization that the lamp in your projector is just a little too old, or maybe it was damaged during your recent trip. If you have a spare lamp, you can change it immediately. Problem solved!


         

        Similar Products


         


         

        Replacement Lamp: SP-4805

        Reviews : Replacement Lamp: SP-4805

        Replacement Lamp: SP-4805
        Product By In Focus
        Lowest Price : $306.99
        Available From 11 Sellers
         

        Technical Details

        • 200W replacement lamp
        • SP-4805 compatible
        • 4000 hours life

         

        Product Description

        InFocus is a projection industry pioneer and the worldwide leader in designing, manufacturing, and marketing award-winning digital projectors, technologies, and services. The company maintains its position at the forefront of the industry by conducting and supporting research and development to expand the category and provide best-in-class projection technologies, and by communicating the value of projection to professionals, educators and consumers.SP-LAMP-020 is a replacement lamp for the InFocus SP777 projector.


         

        Similar Products

                      
         

        Customer Reviews

         "Very good lamp" 2008-02-11
        By Luis Eduardo Franca (Brasilia, Brazil)
        Hi guys, I'm from Brazil and this lamp here cost about U$ 800. So I decided to bought ir from Amazon. The image is clear and very bright, and really seams like I have started using my projector at first time. However I notice that, when I looked closely to the screen, I saw 2 pixels when nothing was reflected. It was black instead of white. So I classified 4 stars.

         "Just Great" 2008-01-02
        By Photo Girl (Walla Walla, WA)
        I purchased this lamp to replace the original Infocus lamp that lasted about 1,700 hours. The picture quality of this projector is outstanding and I hope to use it for another 1,700 hours!

         "Just as expected. " 2007-12-01
        By FamilyOfBigfoots (Montana)
        No problem, got the lamp, put it in and it works. Not much to say.

         "great picture, but very expensive" 2007-02-15
        By C. Griffeth
        This produces a great picture, but the life of the lamp is very short. We have now replaced the lamp twice. Both times, the new lamp lasted less than 400 hours. Will try one more time, than probably replace the projector.


        All Reviews

         

        Thursday, October 29, 2009

        12 Ft M1 Male to DVI-D & USB Projector Video Cable, Infocus+Dell

        Reviews : 12 Ft M1 Male to DVI-D & USB Projector Video Cable, Infocus+Dell

        12 Ft M1 Male to DVI-D & USB Projector Video Cable, Infocus+Dell
        Product By STSI
        No customer reviews yet. Be the first
        Lowest Price : $21.78
        Available From 3 Sellers
         

        Technical Details


           

          Product Description

          M1 cables (also known as EVC or P&D cables) work with projectors and other devices with the new universal M1 connector. The USB component allows the use of a wireless presenter -- with just one cable!

          Supports connection from the M1 port on your projector digital display to DVI on the computer. USB cable included for mouse control on the remote and firmware upgrades.

          Compatible With:

          • InFocus/Screenplay: LP70, LP70+, LP120, LP130, LP350, LP500, LP530, LP540, LP600, LP640, LP650, LP925, LP930, LP935, X2, X3, SP110, SP-4805, SP5000, SP-5700, SP-7200, SP-7205, SP-7210, SP777
          • Proxima: DP1000x, DP1200x, DP6500x
          • ASK-Proxima: C110, C160, C170, C180, C200, M1, M2, M2+
          Not compatible with the following Infocus models:
          • LP335, LP340, LP340B
          *NOTE: This cable uses a P&D style M1 connector. If your projector uses an EVC style M1 connector, this cable will not fit. P&D and EVC have the same number of pins and pin arrangement but different shaped outer shells.


           

          Similar Products


           


           

          InFocus IN12 Work Big DLP Lumens Projector

          Reviews : InFocus IN12 Work Big DLP Lumens Projector

          InFocus IN12 Work Big DLP Lumens Projector
          Product By In Focus
          No customer reviews yet. Be the first
          Lowest Price : Visit store to see price
          Available From 0 Sellers
           

          Technical Details

          • 2000 lumens will illuminate your presentations in any room, no matter how well-lit
          • Internal motorized micro-adjustable zoom and focus allow for the finest image alignment
          • VGA interface and composite video inputs make for easy connectivity
          • DLP XGA display chipset provides brilliant, reliable images
          • Full-featured remote control with unique DLP-based pointer system, motorized zoom and focus adjustments

           

          Product Description

          IN12 Work Big DLP XGA 2000 Lumens Projector


           

          Similar Products


           


           

          Wednesday, October 28, 2009

          Cheetah Mounts APMFS Silver Universal Projector Ceiling Mount

          Reviews : Cheetah Mounts APMFS Silver Universal Projector Ceiling Mount

          Cheetah Mounts APMFS Silver Universal Projector Ceiling Mount
          Product By Cheetah Mounts
          No customer reviews yet. Be the first
          Lowest Price : $34.99
          Available From 2 Sellers
           

          Technical Details

          • Truly Universal Design Using Four Fully Adjustable Arms
          • Swivel in Ceiling Plate Supports Vaulted / Angled Ceilings
          • 360 Degree Swivel, 30 Degree Tilt
          • Ceiling Plate Pass Though for Cable Management
          • Adjustable Extension Poles Available Separately

           

          Product Description

          Incorporating a new design, we are please to introduce our newest generation ceiling mount. We have been selling plasma, LCD, and projector mounts for 7 years and this represents our second entry into the projector mount market. We have taken our best-selling ceiling mount and made several keys improvements to our first generation mount, most importantly an internal cable management feature that helps conceal AV cables, support for unlimited extension poles and support for slanted ceilings. We think you will find our mount compares favorably to any mount on the market, regardless of price, and offers considerable value. Extension poles pictured are available separately at Amazon.


           

          Similar Products

                                             
           


           

          Tuesday, October 27, 2009

          InFocus Mounting Component (F26822) Category: Projector Mounting ...

          Reviews : InFocus Mounting Component (F26822) Category: Projector Mounting Supplies

          InFocus Mounting Component (F26822) Category: Projector Mounting Supplies
          Product By Infocus Corporation
          No customer reviews yet. Be the first
          Lowest Price : $117.67
          Available From 2 Sellers
           

          Technical Details

          • Sold Individually

           

          Product Description

          Item #: F26822. InFocus is a projection industry pioneer and the worldwide leader in designing, manufacturing, and marketing award-winning digital projectors, technologies, and services. The company maintains its position at the forefront of the industry by conducting and supporting research and development to expand the category and provide best-in-class projection technologies, and by communicating the value of projection to professionals, educators and consumers.This ceiling mount extension arm features pipe tubing extension - 18" to 24". Product Description: InFocus mounting component
          Product Type: Mounting component
          Mounting Components: Extension column
          Customers also search for: Discount InFocus Mounting Component, Buy InFocus Mounting Component, Wholesale InFocus Mounting Component, 0797212643988, SP-EXTARM-03, Projector Mounting Supplies


           

          Similar Products


           


           

          M1 Male to VGA-Female Video Adapter for Infocus Projector, Dell

          Reviews : M1 Male to VGA-Female Video Adapter for Infocus Projector, Dell

          M1 Male to VGA-Female Video Adapter for Infocus Projector, Dell
          Product By STSI
          No customer reviews yet. Be the first
          Lowest Price : $19.95
          Available From 2 Sellers
           

          Technical Details


             

            Product Description

            This is an M1 to VGA adapter. This adapter is ideal to put on the end of a VGA to VGA cable that is run between your projector and other devices.

            Compatible With:
            • InFocus/Screenplay: LP70, LP70+, LP120, LP130, LP350, LP500, LP530, LP540, LP600, LP640, LP650, LP925, LP930, LP935, X2, X3, SP110, SP-4805, SP5000, SP-5700, SP-7200, SP-7205, SP-7210, SP777
            • Proxima: DP1000x, DP1200x, DP6500x
            • ASK-Proxima: C110, C160, C170, C180, C200, M1, M2, M2+
            Not compatible with the following Infocus models:
            • LP335, LP340, LP340B,
            *NOTE: This adapter uses a P&D style M1 connector. If your projector uses an EVC style M1 connector, this adapter will not fit. P&D and EVC have the same number of pins and pin arrangement but different shaped outer shells.


             

            Similar Products


             


             

            Monday, October 26, 2009

            InFocus LP335 Dragonfly Video Projector

            Reviews : InFocus LP335 Dragonfly Video Projector

            InFocus LP335 Dragonfly Video Projector
            Product By In Focus
            Lowest Price : Visit store to see price
            Available From 0 Sellers
             

            Technical Details

            • True 1024 x 768 XGA resolution
            • Brilliant 1000 ANSI lumens
            • Lightweight for travel, less than 5 pounds
            • DVI digital/analog connectivity
            • Manual zoom and focus lens

             

            Product Description

            The award-winning InFocus personal projectors will definitely make your life on the road easier. Starting at just 4.8 pounds, they'll fit in the same bag as your notebook computer. They're equally at home in tiny spaces (like overhead bins) as they are in conference rooms.Now that's a rippin' projector. The new LP 335 "Dragonfly" is the smallest, sleekest, and best-looking projector we've ever built. And at a mere 4.8 pounds, it travels like no other projector, either. The LP335 projector makes a statement - before you even turn it on.

            Amazon.com Product Description

            The sleekly designed, portable InFocus LP335 Dragonfly LCD projector lessens your burden while making you a more effective presenter. It's easy to carry and quiet running, and its high resolution and a powerful 1,000 ANSI lumens of brightness combine to provide dynamic colored images for your most compelling performance.

            Weighing less than 5 pounds and measuring just 9 by 10 by 2.5 inches, the Dragonfly is eminently transportable, easy to set up, and adapts to unfamiliar spaces and unpredictable situations. And it operates from an easy-to-use LCD backlit control panel.

            InFocus helps you put on your most professional presentation by offering a built-in manual zoom and focus lens so you can focus without moving the projector. With its 1,000 lumens of brightness you'll rarely have to dim the lights, and the 270-watt metal halide lamp has a 1,000-hour lifetime. Plus, with the included Executive Plus remote you can control the pacing and quality of your presentation from anywhere in the room.

            The Dragonfly is easy to connect, using an advanced M1-DA DVI digital and analog connector with USB mouse for plug-and-project setup. And its advanced electronics supply automatic synchronization, tracking, image positioning, and video source detection. Plus, its true 800 x 600 SVGA resolution with compression up to 1,024 x 768 supports most presentations directly from your notebook PC.

            Texas Instruments provides filmlike image quality through its Digital Light Processing and supports all major video inputs. For example, because the LP335 is HDTV compatible, the projector automatically resizes 1080i HDTV input, preserving a 16:9 ratio. A one-watt speaker delivers built-in audio, and quiet internal operation allows your orator to maintain the attention of the audience free of distraction.

            The InFocus Dragonfly projector is small enough to fit in the portfolio with your laptop computer, and this model includes (along with its own carrying case) an executive remote, MI DVI analog USB cable, composite-video cable, and audio connection cables. InFocus ensures its high level of service and support with Priority Care, including 90 days of free 24/7 technical support while you master all the functions, plus a one-year overnight replacement program and a two-year standard warranty on parts and labor.

             

            Similar Products


             

            Customer Reviews

             "Best in the [price] range" 2000-06-19
            By
            If you check out the reviews for LCD projectors, infocus products rarely surface. But you get a great bang for the buck here. The NEC LF140 has received rave reviews but if you look carefully, it is heavier than the LP335 and the intensity of its lamp is also lesser. Granted than the difference between 800 and 1000 lumens isn't that great (with the logarithmic nature of light intensity) but there will be a minor improvement in performance with the brighter lamp, particularly if you leave the lights on during the presentation. When push comes to shove and you compare the features, you might still be tempted to pick the NEC product for its "brand." If you yield to that temptation, you'll pay about $1500 more for a inferior feature set.

            On the otherhand, the NEC Multisync VT540 is a decent buy. It has all that the dragonfly offers at a comparable price (it is about 3 lbs heavier but you get the MultiSync plug and forget functionality, which is comforting.)

            If you want to save your biceps effort buy the dragonfly, else go for the NEC (reasons being the software and brand.)


            All Reviews

             

            HDMI Female to M1 Male Digital Video Adapter for Infocus Projecto...

            Reviews : HDMI Female to M1 Male Digital Video Adapter for Infocus Projector, Dell

            HDMI Female to M1 Male Digital Video Adapter for Infocus Projector, Dell
            Product By STSI
            No customer reviews yet. Be the first
            Lowest Price : $13.79
            Available From 4 Sellers
             

            Technical Details


               

              Product Description

              This is an M1 to HDMI adapter. This adapter is ideal to put on the end of an HDMI to HDMI cable that is run between your projector and other devices.

              Compatible With:
              • InFocus/Screenplay: LP70, LP70+, LP120, LP130, LP350, LP500, LP530, LP540, LP600, LP640, LP650, LP925, LP930, LP935, X2, X3, SP110, SP-4805, SP5000, SP-5700, SP-7200, SP-7205, SP-7210, SP777
              • Proxima: DP1000x, DP1200x, DP6500x
              • ASK-Proxima: C110, C160, C170, C180, C200, M1, M2, M2+
              Not compatible with the following Infocus models:
              • LP335, LP340, LP340B
              *NOTE: This cable uses a P&D style M1 connector. If your projector uses an EVC style M1 connector, this cable will not fit. P&D and EVC have the same number of pins and pin arrangement but different shaped outer shells.


               

              Similar Products


               


               

              Sunday, October 25, 2009

              InFocus Universal Briefcase - Non-branded - Notebook / projector ...

              Reviews : InFocus Universal Briefcase - Non-branded - Notebook / projector carrying case - black

              InFocus Universal Briefcase - Non-branded - Notebook / projector carrying case - black
              Product By In Focus
              No customer reviews yet. Be the first
              Lowest Price : $91.68
              Available From 1 Sellers
               

              Technical Details

              • Sold Individually

               

              Product Description

              This specialized briefcase enables users to safely tote a projector, laptop and peripherals with ease. Featuring a reinforced ripstop nylon exterior, padded shoulder strap and ergonomic handles this briefcase is ready to go to work with you. This case offers protective padding throughout and multiple pockets to keep everything secure.


               

              Similar Products


               


               

              InFocus - Projector lamp

              Reviews : InFocus - Projector lamp

              InFocus - Projector lamp
              Product By In Focus
              No customer reviews yet. Be the first
              Lowest Price : Visit store to see price
              Available From 9 Sellers
               

              Technical Details

              • Sold Individually

               

              Product Description

              Marketing description is not available.r this product.


               

              Similar Products


               


               

              Saturday, October 24, 2009

              DVI Female to M1 Male Digital Video Adapter for Infocus Projector...

              Reviews : DVI Female to M1 Male Digital Video Adapter for Infocus Projector, Dell

              DVI Female to M1 Male Digital Video Adapter for Infocus Projector, Dell
              Product By STSI
              No customer reviews yet. Be the first
              Lowest Price : $9.40
              Available From 1 Sellers
               

              Technical Details


                 

                Product Description

                This is an M1 to DVI adapter. This adapter is ideal to put on the end of a DVI to DVI cable that is run between your projector and other devices.

                Compatible With:
                • InFocus/Screenplay: LP70, LP70+, LP120, LP130, LP350, LP500, LP530, LP540, LP600, LP640, LP650, LP925, LP930, LP935, X2, X3, SP110, SP-4805, SP5000, SP-5700, SP-7200, SP-7205, SP-7210, SP777
                • Proxima: DP1000x, DP1200x, DP6500x
                • ASK-Proxima: C110, C160, C170, C180, C200, M1, M2, M2+
                Not compatible with the following Infocus models:
                • LP335, LP340, LP340B,
                *NOTE: This cable uses a P&D style M1 connector. If your projector uses an EVC style M1 connector, this cable will not fit. P&D and EVC have the same number of pins and pin arrangement but different shaped outer shells.


                 

                Similar Products


                 


                 

                InFocus IN15 Work Big DLP XGA 2500 Lumens Projector

                Reviews : InFocus IN15 Work Big DLP XGA 2500 Lumens Projector

                InFocus IN15 Work Big DLP XGA 2500 Lumens Projector
                Product By In Focus
                Lowest Price : $1,420.00
                Available From 1 Sellers
                 

                Technical Details

                • Includes - Wireless remote, AC cord, RGB cable, User's Guide, CD-ROM, soft case and accessories pouch
                • Less stress on your shoulders - At 3.9 pounds you'll hardly realize you put such an advanced projector in your briefcase
                • More recognition of your hard work - With 2500 lumens and an 1800 - 1 contrast ratio all of your ideas will shine through
                • Native Resolution - XGA (1024 x 768)
                • Display Technology - 0.55 DLP DMD

                 

                Product Description

                IN15 Work Big DLP XGA 2500 Lumens Projector


                 

                Similar Products

                                                   
                 

                Customer Reviews

                 "Portable & automatic" 2008-05-12
                By Dan Poynter (Santa Barbara, CA United States)
                Size: Same as the small Sony Vaio 11.1" screen computers but a bit thicker. Projector fits into my attache case carry-on bag next to my small Sony Vaio computer.



                Keystone is automatic. The projector senses the lift angle and compensates. The projection is perfectly rectangular. My previous projector often showed a trapezoid picture.



                The cable is VGA/VGA not VGA/DVI so if a a wire breaks in the cable (resulting is a yellow, blue, etc. picture), you can easily find a replacement.



                Flip-up lens cover. When you are switching shows, you can hide your work and cover the projection with the lens cover. Nice.



                TSA. Due to the shape, airport Security will assume the projector is a computer and require it be separately screened. So, you will have to remove it from your carry-on bag for screening with your computer.



                The projector has more lumens than comparable units and runs hot; the lamp is rated at just 2,000 hours.



                I am an author on speaking tours. I fly more than 6,000 miles/week. I appreciate a projector that is reliable, low volume, low weight and sets up quickly.



                Sexy. This projector will turn heads.

                (:



                --Dan Poynter, http://ParaPublishing.com



                 "Plenty of performance in a thin package" 2008-03-01
                By C. Persons (Unalakleet, AK, USA)
                This projector is superb in brightness and flexibility given the extra range in zoom. We use it in ECO mode and find it plenty bright even with the windows unshaded in midday. It is great for iphoto, presentations, & quicktime given the higher res than many sub $1000 projectors. Good color and looks great even projected on a white wall. It has a mini D-sub (RGB) cable and a video connector, so nothing fancy. The only thing is it is somewhat noisy, but when there is action and the volume is pleasurably loud it isn't noticeable much. The remote is intuitive, as is the menu/options. It is a sleek, thin machine. I would give it 4.5/5 stars.


                All Reviews

                 

                Friday, October 23, 2009

                Projector-Gear Projector Ceiling Mount for INFOCUS IN2106, IN2106EP

                Reviews : Projector-Gear Projector Ceiling Mount for INFOCUS IN2106, IN2106EP

                Projector-Gear Projector Ceiling Mount for INFOCUS IN2106, IN2106EP
                Product By Projector-Gear
                No customer reviews yet. Be the first
                Lowest Price : $31.95
                Available From 1 Sellers
                 

                Technical Details

                • Precision Machined Aircraft Aluminum Design - 100% 6061-T6 Aluminum
                • BETTER DESIGN -- Max Tilt: +/-40°, that is 25% more adjustment than the imitators
                • LOW PROFILE -- Sets the projector only 4" from the ceiling
                • NO TOOLS REQUIRED -- Can Be Adjusted By Hand
                • THIS MOUNT IS COVERED BY OUR EXCLUSIVE MOUNT UPGRADE PROGRAM. YOU WILL NEVER HAVE TO PAY FULL PRICE FOR A PROJECTOR MOUNT AGAIN. ASK US HOW.

                 

                Product Description

                WHILE I SHOULD BE FLATTERED THAT ANOTHER SELLER IS USING PICTURES OR OUR MOUNTS TO SELL THEIRS, IT IS REALLY NOT FAIR TO THE CONSUMER OR US. If it looks like our projector mounts but doesn't say "Projector-Gear" in the title, it is not a REAL Projector-Gear mount. We are proudly the highest rated and most sucessful projector mount seller on ebay: Kramerica_incorporated, and have a 100% rating with over 18,000 feedback! We have been at the top for years and had lots of people trying to copy our designs, but this is the first time we had another seller actually use our mounts in their pictures. I can't blame them though. Our mounts look MUCH NICER! Plus our mounts can adjust all the way up to +/-40° from side to side and tilting up and down. That is 25% more adjustability than the imitation mounts. Our Projector-Gear mounts are constructed using precision, custom designed, aluminum parts. If it does not say "Projector-Gear" in the title of the ad, it is NOT a real Projector-Gear projector mount. Our mounts are proudly designed and manufactured in the USA by Projector-Gear, LLC -- Beware Of Cheap Imitations. WE OFFER AN EXCLUSIVE MOUNT UPGRADE PROGRAM. When you buy a new projector, you will never need to pay full price for a projector mount again. When you get a new projector, upgrade your mount for only $14.99 + shipping and handling. Just purchase a new base plate online and it will ship within 24 hours via 2-3 day priority mail. Unlike so-called "FREE" exchange programs, you won't have to UNINSTALL your old mount, PAY to ship it back, WAIT and then PAY to have the replacement shipped. Ask us for more details. 90 Day Money Back Guarantee.


                 

                Similar Products


                 


                 

                Thursday, October 22, 2009

                Projector-Gear Projector Ceiling Mount for INFOCUS IN3104

                Reviews : Projector-Gear Projector Ceiling Mount for INFOCUS IN3104

                Projector-Gear Projector Ceiling Mount for INFOCUS IN3104
                Product By Projector-Gear
                No customer reviews yet. Be the first
                Lowest Price : $19.95
                Available From 1 Sellers
                 

                Technical Details

                • Aircraft Grade 6061-T6 Aluminum Mounting Plate
                • SUPERIOR DESIGN -- Max Tilt: +/-35°, most mounts offer less than +/-25°
                • LOW PROFILE -- Sets the projector only 4" from the ceiling
                • Easy to Follow Instructions (with lots of pictures). You will have it up and running in minutes.
                • This kit is 100% complete, all you need is your projector. We supply everything you need to attach the mount to your projector and then attach the mount to the ceiling.

                 

                Product Description

                This mount is designed specifically for your projector and is easily attached without modifications. The plate is made of 6061-T6 aluminum (the same grade aluminum used in aircraft) and spaced above the projector to allow maximum airflow and cooling. This mount utilizes a swivel ball joint that will swivel to the desired position and lock in place when twisted tightened (simply hand tighten). Our mounts are designed and manufactured in the USA by Projector-Gear, LLC. Buy with confidence; tens of thousands of Projector-Gear mounts have been sold worldwide on ebay for years and have a 100% rating on over 19,000 feedback. Ask about our Mount Upgrade Program; best in the industry! When you buy a new projector, you will never need to pay full price for a projector mount again. When you get a new projector, don't buy a new mount. Simply upgrade your mount. Just purchase a new base plate and it will ship within 24 hours via 2-3 day priority mail. Unlike supposedly PAY NOTHING Exchange Programs, you won't have to UNINSTALL your old mount, PAY to ship it back, WAIT and then PAY to have the replacement shipped. Ask us for more details. 90 Day Money Back Guarantee.


                 

                Similar Products


                 


                 

                Projector-Gear Projector Ceiling Mount for INFOCUS IN78EX

                Reviews : Projector-Gear Projector Ceiling Mount for INFOCUS IN78EX

                Projector-Gear Projector Ceiling Mount for INFOCUS IN78EX
                Product By Projector-Gear
                No customer reviews yet. Be the first
                Lowest Price : $19.95
                Available From 1 Sellers
                 

                Technical Details

                • Aircraft Grade 6061-T6 Aluminum Mounting Plate
                • SUPERIOR DESIGN -- Max Tilt: +/-35°, most mounts offer less than +/-25°
                • LOW PROFILE -- Sets the projector only 4" from the ceiling
                • Easy to Follow Instructions (with lots of pictures). You will have it up and running in minutes.
                • This kit is 100% complete, all you need is your projector. We supply everything you need to attach the mount to your projector and then attach the mount to the ceiling.

                 

                Product Description

                This mount is designed specifically for your projector and is easily attached without modifications. The plate is made of 6061-T6 aluminum (the same grade aluminum used in aircraft) and spaced above the projector to allow maximum airflow and cooling. This mount utilizes a swivel ball joint that will swivel to the desired position and lock in place when twisted tightened (simply hand tighten). Our mounts are designed and manufactured in the USA by Projector-Gear, LLC. Buy with confidence; tens of thousands of Projector-Gear mounts have been sold worldwide on ebay for years and have a 100% rating on over 19,000 feedback. Ask about our Mount Upgrade Program; best in the industry! When you buy a new projector, you will never need to pay full price for a projector mount again. When you get a new projector, don't buy a new mount. Simply upgrade your mount. Just purchase a new base plate and it will ship within 24 hours via 2-3 day priority mail. Unlike supposedly PAY NOTHING Exchange Programs, you won't have to UNINSTALL your old mount, PAY to ship it back, WAIT and then PAY to have the replacement shipped. Ask us for more details. 90 Day Money Back Guarantee.


                 

                Similar Products


                 


                 

                Wednesday, October 21, 2009

                Projector-Gear Projector Ceiling Mount fits INFOCUS IN81 Projectors

                Reviews : Projector-Gear Projector Ceiling Mount fits INFOCUS IN81 Projectors

                Projector-Gear Projector Ceiling Mount fits INFOCUS IN81 Projectors
                Product By Projector-Gear
                No customer reviews yet. Be the first
                Lowest Price : Visit store to see price
                Available From 0 Sellers
                 

                Technical Details

                • 100% Aluminum Design
                • CNC Precision Machined 6061 T6 Aluminum ( Aircraft Aluminum ) -- Professional Grade Construction
                • Low Profile -- 4 inch ( 10cm ) Drop from Ceiling
                • Quick and Easy Detachment from the Ceiling -- NO TOOLS REQUIRED
                • NO ASSEMBLY REQUIRED -- The Mount is Fully Assembled Right Out of the Box

                 

                Product Description

                The Projector-Gear ceiling mount kit includes the aluminum projector mount, the hardware to attach the mount to the projector and hardware for attaching the mount to a wooden beam or in drywall. Spacers are included to keep the mount elevated off the projector surface for proper ventilation. The ceiling mount offers 3 way independent adjustment: Yaw ( horizontal spin ) 360 degrees, Pitch ( up and down tilt ) +/- 35 degrees and Roll (side to side) +/- 35 degrees. The mount can be adjusted by hand - No tools required. This user-friendly mount comes fully assembled right out of the box for quick and easy installation. The mount will put your projector 4" below the ceiling. If you need it lower than 4", extensions are available for this projector mount. CLICK on the OTHER PRODUCTS BY PROJECTOR-GEAR under the title for this product to purchase an extension.


                 

                Similar Products


                 


                 

                Projector-Gear Projector Ceiling Mount for INFOCUS Screenplay 480...

                Reviews : Projector-Gear Projector Ceiling Mount for INFOCUS Screenplay 4800 SP4800

                Projector-Gear Projector Ceiling Mount for INFOCUS Screenplay 4800 SP4800
                Product By Projector-Gear
                No customer reviews yet. Be the first
                Lowest Price : $19.95
                Available From 1 Sellers
                 

                Technical Details

                • Aircraft Grade 6061-T6 Aluminum Mounting Plate
                • SUPERIOR DESIGN -- Max Tilt: +/-35°, most mounts offer less than +/-25°
                • LOW PROFILE -- Sets the projector only 4" from the ceiling
                • Easy to Follow Instructions (with lots of pictures). You will have it up and running in minutes.
                • This kit is 100% complete, all you need is your projector. We supply everything you need to attach the mount to your projector and then attach the mount to the ceiling.

                 

                Product Description

                This mount is designed specifically for your projector and is easily attached without modifications. The plate is made of 6061-T6 aluminum (the same grade aluminum used in aircraft) and spaced above the projector to allow maximum airflow and cooling. This mount utilizes a swivel ball joint that will swivel to the desired position and lock in place when twisted tightened (simply hand tighten). Our mounts are designed and manufactured in the USA by Projector-Gear, LLC. Buy with confidence; tens of thousands of Projector-Gear mounts have been sold worldwide on ebay for years and have a 100% rating on over 19,000 feedback. Ask about our Mount Upgrade Program; best in the industry! When you buy a new projector, you will never need to pay full price for a projector mount again. When you get a new projector, don't buy a new mount. Simply upgrade your mount. Just purchase a new base plate and it will ship within 24 hours via 2-3 day priority mail. Unlike supposedly PAY NOTHING Exchange Programs, you won't have to UNINSTALL your old mount, PAY to ship it back, WAIT and then PAY to have the replacement shipped. Ask us for more details. 90 Day Money Back Guarantee.


                 

                Similar Products


                 


                 

                Tuesday, October 20, 2009

                Projector-Gear Projector Ceiling Mount for INFOCUS IN3108

                Reviews : Projector-Gear Projector Ceiling Mount for INFOCUS IN3108

                Projector-Gear Projector Ceiling Mount for INFOCUS IN3108
                Product By Projector-Gear
                No customer reviews yet. Be the first
                Lowest Price : $31.95
                Available From 1 Sellers
                 

                Technical Details

                • Precision Machined Aircraft Aluminum Design - 100% 6061-T6 Aluminum
                • BETTER DESIGN -- Max Tilt: +/-40°, that is 25% more adjustment than the imitators
                • LOW PROFILE -- Sets the projector only 4" from the ceiling
                • NO TOOLS REQUIRED -- Can Be Adjusted By Hand
                • THIS MOUNT IS COVERED BY OUR EXCLUSIVE MOUNT UPGRADE PROGRAM. YOU WILL NEVER HAVE TO PAY FULL PRICE FOR A PROJECTOR MOUNT AGAIN. ASK US HOW.

                 

                Product Description

                WHILE I SHOULD BE FLATTERED THAT ANOTHER SELLER IS USING PICTURES OR OUR MOUNTS TO SELL THEIRS, IT IS REALLY NOT FAIR TO THE CONSUMER OR US. If it looks like our projector mounts but doesn't say "Projector-Gear" in the title, it is not a REAL Projector-Gear mount. We are proudly the highest rated and most sucessful projector mount seller on ebay: Kramerica_incorporated, and have a 100% rating with over 18,000 feedback! We have been at the top for years and had lots of people trying to copy our designs, but this is the first time we had another seller actually use our mounts in their pictures. I can't blame them though. Our mounts look MUCH NICER! Plus our mounts can adjust all the way up to +/-40° from side to side and tilting up and down. That is 25% more adjustability than the imitation mounts. Our Projector-Gear mounts are constructed using precision, custom designed, aluminum parts. If it does not say "Projector-Gear" in the title of the ad, it is NOT a real Projector-Gear projector mount. Our mounts are proudly designed and manufactured in the USA by Projector-Gear, LLC -- Beware Of Cheap Imitations. WE OFFER AN EXCLUSIVE MOUNT UPGRADE PROGRAM. When you buy a new projector, you will never need to pay full price for a projector mount again. When you get a new projector, upgrade your mount for only $14.99 + shipping and handling. Just purchase a new base plate online and it will ship within 24 hours via 2-3 day priority mail. Unlike so-called "FREE" exchange programs, you won't have to UNINSTALL your old mount, PAY to ship it back, WAIT and then PAY to have the replacement shipped. Ask us for more details. 90 Day Money Back Guarantee.


                 

                Similar Products


                 


                 

                Projector-Gear Projector Ceiling Mount for INFOCUS X3

                Reviews : Projector-Gear Projector Ceiling Mount for INFOCUS X3

                Projector-Gear Projector Ceiling Mount for INFOCUS X3
                Product By Projector-Gear
                No customer reviews yet. Be the first
                Lowest Price : $19.95
                Available From 1 Sellers
                 

                Technical Details

                • Aircraft Grade 6061-T6 Aluminum Mounting Plate
                • SUPERIOR DESIGN -- Max Tilt: +/-35°, most mounts offer less than +/-25°
                • LOW PROFILE -- Sets the projector only 4" from the ceiling
                • Easy to Follow Instructions (with lots of pictures). You will have it up and running in minutes.
                • This kit is 100% complete, all you need is your projector. We supply everything you need to attach the mount to your projector and then attach the mount to the ceiling.

                 

                Product Description

                This mount is designed specifically for your projector and is easily attached without modifications. The plate is made of 6061-T6 aluminum (the same grade aluminum used in aircraft) and spaced above the projector to allow maximum airflow and cooling. This mount utilizes a swivel ball joint that will swivel to the desired position and lock in place when twisted tightened (simply hand tighten). Our mounts are designed and manufactured in the USA by Projector-Gear, LLC. Buy with confidence; tens of thousands of Projector-Gear mounts have been sold worldwide on ebay for years and have a 100% rating on over 19,000 feedback. Ask about our Mount Upgrade Program; best in the industry! When you buy a new projector, you will never need to pay full price for a projector mount again. When you get a new projector, don't buy a new mount. Simply upgrade your mount. Just purchase a new base plate and it will ship within 24 hours via 2-3 day priority mail. Unlike supposedly PAY NOTHING Exchange Programs, you won't have to UNINSTALL your old mount, PAY to ship it back, WAIT and then PAY to have the replacement shipped. Ask us for more details. 90 Day Money Back Guarantee.


                 

                Similar Products


                 


                 

                Monday, October 19, 2009

                Projector-Gear Projector Ceiling Mount for INFOCUS Screenplay 570...

                Reviews : Projector-Gear Projector Ceiling Mount for INFOCUS Screenplay 5700, SP5700

                Projector-Gear Projector Ceiling Mount for INFOCUS Screenplay 5700, SP5700
                Product By Projector-Gear
                No customer reviews yet. Be the first
                Lowest Price : $31.95
                Available From 1 Sellers
                 

                Technical Details

                • Precision Machined Aircraft Aluminum Design - 100% 6061-T6 Aluminum
                • BETTER DESIGN -- Max Tilt: +/-40°, that is 25% more adjustment than the imitators
                • LOW PROFILE -- Sets the projector only 4" from the ceiling
                • NO TOOLS REQUIRED -- Can Be Adjusted By Hand
                • THIS MOUNT IS COVERED BY OUR EXCLUSIVE MOUNT UPGRADE PROGRAM. YOU WILL NEVER HAVE TO PAY FULL PRICE FOR A PROJECTOR MOUNT AGAIN. ASK US HOW.

                 

                Product Description

                WHILE I SHOULD BE FLATTERED THAT ANOTHER SELLER IS USING PICTURES OR OUR MOUNTS TO SELL THEIRS, IT IS REALLY NOT FAIR TO THE CONSUMER OR US. If it looks like our projector mounts but doesn't say "Projector-Gear" in the title, it is not a REAL Projector-Gear mount. We are proudly the highest rated and most sucessful projector mount seller on ebay: Kramerica_incorporated, and have a 100% rating with over 18,000 feedback! We have been at the top for years and had lots of people trying to copy our designs, but this is the first time we had another seller actually use our mounts in their pictures. I can't blame them though. Our mounts look MUCH NICER! Plus our mounts can adjust all the way up to +/-40° from side to side and tilting up and down. That is 25% more adjustability than the imitation mounts. Our Projector-Gear mounts are constructed using precision, custom designed, aluminum parts. If it does not say "Projector-Gear" in the title of the ad, it is NOT a real Projector-Gear projector mount. Our mounts are proudly designed and manufactured in the USA by Projector-Gear, LLC -- Beware Of Cheap Imitations. WE OFFER AN EXCLUSIVE MOUNT UPGRADE PROGRAM. When you buy a new projector, you will never need to pay full price for a projector mount again. When you get a new projector, upgrade your mount for only $14.99 + shipping and handling. Just purchase a new base plate online and it will ship within 24 hours via 2-3 day priority mail. Unlike so-called "FREE" exchange programs, you won't have to UNINSTALL your old mount, PAY to ship it back, WAIT and then PAY to have the replacement shipped. Ask us for more details. 90 Day Money Back Guarantee.


                 

                Similar Products


                 


                 

                Projector-Gear Projector Ceiling Mount for INFOCUS IN3102

                Reviews : Projector-Gear Projector Ceiling Mount for INFOCUS IN3102

                Projector-Gear Projector Ceiling Mount for INFOCUS IN3102
                Product By Projector-Gear
                No customer reviews yet. Be the first
                Lowest Price : $19.95
                Available From 1 Sellers
                 

                Technical Details

                • Aircraft Grade 6061-T6 Aluminum Mounting Plate
                • SUPERIOR DESIGN -- Max Tilt: +/-35°, most mounts offer less than +/-25°
                • LOW PROFILE -- Sets the projector only 4" from the ceiling
                • Easy to Follow Instructions (with lots of pictures). You will have it up and running in minutes.
                • This kit is 100% complete, all you need is your projector. We supply everything you need to attach the mount to your projector and then attach the mount to the ceiling.

                 

                Product Description

                This mount is designed specifically for your projector and is easily attached without modifications. The plate is made of 6061-T6 aluminum (the same grade aluminum used in aircraft) and spaced above the projector to allow maximum airflow and cooling. This mount utilizes a swivel ball joint that will swivel to the desired position and lock in place when twisted tightened (simply hand tighten). Our mounts are designed and manufactured in the USA by Projector-Gear, LLC. Buy with confidence; tens of thousands of Projector-Gear mounts have been sold worldwide on ebay for years and have a 100% rating on over 19,000 feedback. Ask about our Mount Upgrade Program; best in the industry! When you buy a new projector, you will never need to pay full price for a projector mount again. When you get a new projector, don't buy a new mount. Simply upgrade your mount. Just purchase a new base plate and it will ship within 24 hours via 2-3 day priority mail. Unlike supposedly PAY NOTHING Exchange Programs, you won't have to UNINSTALL your old mount, PAY to ship it back, WAIT and then PAY to have the replacement shipped. Ask us for more details. 90 Day Money Back Guarantee.


                 

                Similar Products